Typical before and after power and torque for every Audi RSQ3 engine we tune. Your own car is custom mapped on our in-house 4WD dyno, and every map is fully reversible.
Stage 2 Petrol supporting mods: decat or sports cat + uprated intercooler.
Every price on this page is a full custom dyno tune
Not a generic file bought in and flashed over the port. Your Audi RSQ3 is strapped to our in-house 4WD dyno and the map is written for your car, on the day, from its own data.
Health check firstWe look the car over and read the fault memory before we touch anything. If something is wrong, you get told. We don't map over a problem.
Live data loggingBoost, ignition timing, fuelling, knock and temperatures all watched in real time while the car is running under load.
Custom calibration on the dynoThe map is built and adjusted run by run against what your engine is actually doing, not what a file supplier assumed.
Before and after printoutYou leave with the graph: your standard figures and your tuned figures, measured on the same rollers, the same day.
Spread the cost. From £166.50/mo over 6 months at 0% APR with Bumper, interest free. Or choose Pay in full when you book and pay with Klarna. How finance works › Book engine and gearbox tuning together and save £125.
Audi RSQ3 remapping questions
What does Stage 1 tuning do for an Audi RSQ3?
Gains vary by engine. The strongest on the Audi RSQ3 is the 2.5 TFSI, which goes from 310bhp and 420Nm to 420bhp and 620Nm, a gain of 110bhp. Find your engine in the table above for its own numbers.
What does an Audi RSQ3 remap cost?
Prices start at £999 inc VAT for Stage 1 on an Audi RSQ3. Each engine in the table shows its own price, and adding gearbox tuning at the same time saves £125. Bumper 0% finance over 6 months and Klarna are both available.
Will my Audi RSQ3 need unlocking before it can be tuned?
It depends on the engine as much as the year. Audis from roughly mid-2020 are locked, and so is the 4.0 V8 TFSI regardless of age. Either way we sort the unlocking: in-house on our bench or sent away, your choice, except the 4.0 V8 ECUs, which have to go away. Give us your reg and we will tell you which applies to yours. Send us your reg and we will confirm ›
Do I need any hardware for Stage 2 on an Audi RSQ3?
A decat or sports cat downpipe and an uprated intercooler. Stage 2 is not something we can map safely on a standard car, so without the hardware we would fit Stage 1 and you can step up once it is fitted.
Does a remap invalidate the warranty or insurance on an Audi RSQ3?
You will need to tell your insurer, as with any modification, and it can affect a remaining manufacturer warranty. Every map is reversible, so the Audi RSQ3 can be put back to its factory software at any point.
How long will my Audi RSQ3 be with you, and can it be undone?
Allow roughly two hours for Stage 1, including any ECU unlock on our own bench. Everything is reversible: the Audi RSQ3 can go back to its factory software on request.
Ways to paywhen you pay in full0% finance over 6 monthsCard & Apple Pay£50 deposit secures your slotHow finance works ›
Whichever you pick, the total carries through to checkout, so pay in full by card, Apple Pay or Klarna, or secure the slot with a £50 deposit. Figures are typical for a healthy, standard vehicle; your before and after dyno printout shows exactly what your car makes. Your car’s actual output depends on its condition, fuel quality and any supporting modifications. Prices shown are for Stage 1 custom dyno tuning inc VAT; locked ECUs (most BMW and Audi registered from mid-2020) carry an additional unlocking charge, confirmed when you book.
We use essential cookies to make this site work. With your consent we also use cookies to measure traffic and improve our marketing. See our Privacy Policy.
·
★ 4.9 · 264+ Google reviews
·
In-house 4WD dyno · before & after printout
·
BMW ECU unlocking · in-house, same day
·
0% finance with Bumper · spread it over 6 months
·
10,000+ vehicles tuned · 14+ years
·
BMW & VAG specialists · Warrington
·
Pay with 