4.9 · 270+ reviews
Pay with Klarna · ★ 4.9 · 270+ Google reviews · In-house 4WD dyno · before & after printout · BMW ECU unlocking · in-house, same day · 0% finance with Bumper · spread it over 6 months · 10,000+ vehicles tuned · 15+ years · BMW & VAG specialists · Warrington · Pay with Klarna · ★ 4.9 · 270+ Google reviews · In-house 4WD dyno · before & after printout · BMW ECU unlocking · in-house, same day · 0% finance with Bumper · spread it over 6 months · 10,000+ vehicles tuned · 15+ years · BMW & VAG specialists · Warrington ·
... ...
Gift Cards ›
0% Finance ›
BMW 640d Gran Coupé on the DC Remapping UK 4WD dyno

BMW Tuning  /  BMW 640d

DC Remapping UK · BMW

BMW 640d Stage 1 Remap

Bespoke ECU calibrations for the N57 twin-turbo diesel. Unlock the full potential of your 40d safely on our V-Tech 4WD linked rolling road.

387bhpTuned BHP · from 305
770NmTuned Nm · from 628
305bhpStock BHP
628NmStock Nm

Tuning Packages

Choose Your Stage

ECU + Gearbox Tune

Stage 1

Custom ECU calibration + xHP gearbox software. No hardware modifications required. Suitable for standard cars in good health. Dyno verified on our V-Tech 4WD linked rolling road.

Power385–390BHP
Torque770–780Nm
  • Gearbox: xHP Included
Get a Quote →

ECU + Gearbox + Hardware

Stage 2

Modifications required before Stage 2 calibration can be applied, see below. Significant gains over Stage 1 with the right hardware in place.

Power400–410BHP
Torque800–830Nm
  • Gearbox: xHP Included
Get a Quote →
2

Stage 2, Modifications Required
DPF Removal (off-road / track use only) · Uprated Intercooler

Gearbox Software

xHP ZF8 Gearbox Tune

What Is xHP?

xHP is the world-leading gearbox software for BMW ZF 8-speed automatic transmissions. It unlocks the full potential of the ZF8 by rewriting shift logic, torque limits and pressure tables that are locked down from the factory.

On the 40d, which produces considerably more torque than the ZF8's factory calibration is programmed to expect after a Stage 1 remap, xHP is essential, not optional. Without it, the gearbox will limit engine torque to protect itself, meaning you'll never see the true gains from your ECU map.

With xHP installed alongside your ECU remap, both systems work in harmony. Shift speeds increase dramatically, torque limits are raised to match the engine output, and you unlock additional driving modes including a track-optimised shift map. The result is faster, harder shifts and a driving experience that genuinely transforms the car.

DC Remapping, xHP Gold Dealer

DC Remapping UK is an official xHP Gold dealer, the top tier of the xHP dealer network, as listed on xHP’s own dealer locator.

Every xHP calibration is carried out on the dyno so we can verify the shift points and torque figures are correct for your specific ECU map, not a generic off-the-shelf setting.

The DC Difference

Bespoke 40d Calibrations

Unlock the full potential of your BMW with a custom ECU calibration from DC Remapping. Our team of experts specialise in creating bespoke calibrations tailored to your specific vehicle, making sure you get the best performance possible.

Our power and torque improvements are designed to stay within the safe limits of your engine, ensuring your vehicle remains reliable and safe to drive. With our Stage 1 Dyno Tuning, you can expect to see increases of up to 385–390 horsepower and 750–770 Nm of torque, all while maintaining the integrity of your engine and its components.

We understand the importance of maintaining the health of your vehicle, which is why we carry out a thorough health check before any tuning takes place. This ensures that any potential issues are addressed before we begin the tuning process.

Our team has spent thousands of hours researching and developing these engines, ensuring that our calibrations are accurate and reliable. Trust us to take your BMW to the next level.

At DC Remapping we use the state-of-the-art V-Tech 4WD Linked Dyno, specifically designed to handle the most complex and demanding systems, including xDrive. This ensures we can provide accurate, precise tuning for your vehicle, maximising its performance and efficiency.

We understand that every vehicle is unique. Our V-Tech 4WD Linked Dyno is xDrive safe, guaranteeing your vehicle is in the best hands. Our team of expert tuners is dedicated to providing the best tuning services for all our customers, ensuring you experience the full potential of your car's performance.

4WD

xDrive, Safe With Us
BMW xDrive, Audi Quattro and Mercedes 4Matic systems cannot be safely run on a standard non-linked rolling road. Our V-Tech VT-4 is mechanically linked, meaning your 4WD system runs as intended, no risk of transfer box damage and no over-reading of torque figures.

On the Dyno

BMW 40d · Rolling Road

BMW 640d on DC Remapping UK dynoBMW X5 xDrive on DC Remapping UK dyno

BMW 640d, On the Dyno · BMW X5 xDrive, 4WD Run

DC Remapping UK · Rolling Road Result

BMW 40d dyno graph — Stock vs DC Stage 1 Custom
Stock vs DC Stage 1 Custom & xHP ST3 — Engine Power, Torque & Wheel Power

See It In Action

BMW 40d · Dyno Run

Customer Reviews

What Our Customers Say

What BMW owners say on Google

4.9 from 270+ Google reviews
★★★★★
Thank you Dan, I recently had my 640d remapped with the additional gearbox software upgrade and what a difference it has made. The two work in conjunction together to make a good car a really great and fun car to drive and use, I have also seen a small increase in fuel economy also over the last couple of weeks when I had the opportunity to use the car more. There is more power and torque but also the drivability is so much improved …
Philip Piper · BMW 640d · Google review
★★★★★
Fantastic experience at DC today , whilst working on my pride and joy 640d it was noticed a previous tuner had forced my ecu in far to hard and damaged the loom causing a short , the team worked to fix this and stayed late to totally transform my car into an absolute rocket. Top service rarely found these days Customer for life now 🙏
Matt Gregory · BMW 640d · Google review
★★★★★
Had my 435d stage 1 engine and stage 3 gear box done 3 weeks ago and all I can say is wow totally different car she’s a beast 💯 recommend thanks fellas 👌👍
Rob White · BMW 435d, same N57 engine · Google review
★★★★★
Great service. Very friendly and helpful. Turned my 335d into a monster with a stage 1 map and stage 3 gearbox map. What a difference!!! Much appreciated 👍👍👍
Nabeel Hanif · BMW 335d, same N57 engine · Google review

Quoted word for word from our Google reviews. Read them all on Google.

FAQs

BMW 640d Tuning Questions

How much power will a Stage 1 remap add to my BMW 640d?
Our Stage 1 maps are custom-built on our in-house 4WD dyno and tailored to your exact BMW 640d, never a generic off-the-shelf file. You'll see a substantial, fully dyno-proven gain in both power and torque; the headline figures for this platform are shown at the top of this page. Because every map is refined over multiple runs, the results are realistic, repeatable and safe.
Is remapping my BMW 640d safe and reliable?
Yes. We tune strictly within the safe mechanical limits of your BMW 640d's engine and gearbox, monitoring temperatures, pressures and torque loads across multiple dyno pulls. We've spent 15+ years tuning these platforms, so our maps prioritise long-term reliability alongside performance.
Will a remap affect my warranty or insurance?
A remap is an aftermarket modification, so it's the owner's responsibility to declare it to their insurer. Our maps are fully reversible, we can return the BMW 640d to its factory software whenever you need, for example before a main-dealer visit.
Is the remap reversible?
Completely. It is fully reversible: your BMW 640d can be put back to its factory software at any time.
Will tuning improve my BMW 640d's fuel economy?
We tune for performance, not fuel economy, so we don’t promise or guarantee any MPG saving. How much fuel the car uses comes down mostly to how it’s driven, and using the extra performance will use more.
How long does it take, and do you tune on a dyno?
Most Stage 1 tunes are completed within a few hours; allow up to a day for combined ECU and gearbox work. Every BMW 640d is mapped on our in-house 4WD dyno in Warrington, never on the road, so the result is measured and consistent. You're welcome to relax in our customer waiting area while we work.

Check Your Vehicle

See What Your Car Will Make

Pick your make, model and engine for the expected Stage 1 and Stage 2 gains, your price, and book straight from the result.

Choose your make to begin.

BMW 640d on the DC Remapping UK 4WD dyno

Real Customer Result

BMW 640d

N57 · Stage 1 + xHP ST3

305 → 387 bhp 770Nm

This 640d arrived at 305bhp and left at a dyno-proven 387bhp and 770Nm, without losing the 6 Series' manners.

Read The Full Build →
BMW 640d on the DC Remapping UK 4WD dyno

Ready to Unlock Your 40d?

Book your appointment today and experience the full potential of your BMW.