4.9 · 270+ reviews
Pay with Klarna · ★ 4.9 · 270+ Google reviews · In-house 4WD dyno · before & after printout · BMW ECU unlocking · in-house, same day · 0% finance with Bumper · spread it over 6 months · 10,000+ vehicles tuned · 15+ years · BMW & VAG specialists · Warrington · Pay with Klarna · ★ 4.9 · 270+ Google reviews · In-house 4WD dyno · before & after printout · BMW ECU unlocking · in-house, same day · 0% finance with Bumper · spread it over 6 months · 10,000+ vehicles tuned · 15+ years · BMW & VAG specialists · Warrington ·
... ...
Gift Cards ›
0% Finance ›

Home / Blog / Customer Builds

Customer Builds

Audi RS4 Avant B9: Stage 1 + TCU, 536bhp & 798Nm

14 November 2026 · DC Remapping UK

This Audi RS4 Avant (B9) came in for our Stage 1 custom dyno tune for its 2.9 TFSI twin-turbo V6, with a TCU calibration for its 8-speed tiptronic gearbox, both developed on the same visit.

Audi RS4 Avant rear three-quarter on the dyno under the DC sign
The RS4 Avant strapped down on our 4WD linked dyno.

The numbers

On the baseline run it made 451.2bhp and 621Nm. With our calibration and the TCU calibration it made 536.3bhp and 798Nm, with 470.8bhp at the wheels. That is 85.1bhp and 177Nm more:

MeasurementStockDC Stage 1 Custom & TCU
Engine power451.2 hp @ 5,990rpm536.3 hp @ 5,858rpm
Engine torque621 Nm @ 3,667rpm798 Nm @ 3,695rpm
Wheel power375.5 hp @ 5,870rpm470.8 hp @ 5,761rpm
Audi RS4 Avant dyno graph, stock vs DC Stage 1 Custom & TCU
The dyno printout: stock in red, our Stage 1 + TCU in blue.

Watch the full dyno run

This is the final pull on our dyno, filmed from behind the car, from the start of the run right through to the end. Tap Sound on to hear it.

The final power run on our 4WD linked dyno: 536.3bhp and 798Nm.

More torque than an R8 V10

Every Audi R8 V10 makes 580Nm or less. Tuned, this RS4 made 798Nm on our rollers, from the RS4’s own 2.9 TFSI. It also beat the 530bhp and 780Nm we quote for a B9 RS4 at Stage 1 in our RS4 tuning figures.

Audi RS4 Avant 2.9 TFSI twin-turbo V6 engine bay
2.9 TFSI twin-turbo V6: health checked and logged before any tuning.

Where the gain is

The peak is only part of it. Tuned, this RS4 holds over 750Nm from around 2,850 to 4,400rpm, with 150Nm or more extra torque from around 2,800 to 5,200rpm and 80bhp or more extra power from around 3,000rpm right to the top of the stock run. It stays above 500bhp from around 5,250rpm to the end of the run. In normal driving that is the part you feel: it pulls harder through the mid-range and keeps pulling to the top.

The gearbox, tuned with the engine

The 8-speed tiptronic’s TCU was calibrated on the same visit, set up to match the extra torque, so the engine and gearbox are calibrated as one package instead of two separate jobs.

Audi RS4 Avant front wheel and red brake caliper on the rollers
Baseline runs first: every calibration starts from the car’s own numbers.

How it was done

Diagnostics and a health check first, then baseline runs on our 4WD linked dyno with live data logging. The engine calibration was built from there with repeated runs, the gearbox calibration was set up to match, and the final pulls verified the result. No generic files: a calibration written for this car, proven on our dyno.

Audi RS4 Avant front three-quarter on the dyno, bonnet up
Bonnet up between runs: every change logged and checked on the dyno.

Got an RS4 or RS5 with the 2.9 TFSI? See our Audi RS4 and Audi RS5 tuning figures, check your car’s gains and price, or read about the S5 Sportback and the S5 3.0 TFSI we have tuned.

Related Reading

All Tuning Guides

Ready When You Are

See What Your Car Will Make

Specialist BMW & VAG tuning, dyno-proven in Warrington. Check your exact gains and price, then book online.

See Your Car’s Gains & Price Book Your Remap

Car not listed, or after something specific? Get a free quote ›