This 2021 Audi RS Q3 2.5 TFSI came in for our Stage 1 custom dyno tune for its five-cylinder, with a TCU calibration for its 7-speed S tronic gearbox, both developed on the same visit. Its 2.5 TFSI is covered on our Audi RS Q3 tuning figures page.

This RS Q3 arrived with an aftermarket downpipe already fitted. Both the baseline and the final runs were made with it on the car, so the before and after figures compare like with like, and the calibration was developed around the car exactly as it came in. Its baseline is already above Audi’s quoted 400PS and 480Nm, so the gains here are measured from this car, not from a standard one.
On the baseline run it made 411.4bhp and 552Nm. With our calibration and the TCU gearbox calibration it made 471.7bhp and 657Nm, with 406.1bhp at the wheels. That is 60.3bhp and 105Nm more:
| Measurement | Stock | DC Stage 1 Custom & TCU |
|---|---|---|
| Engine power | 411.4 hp @ 6,253rpm | 471.7 hp @ 6,670rpm |
| Engine torque | 552 Nm @ 3,219rpm | 657 Nm @ 3,794rpm |
| Wheel power | 347.2 hp @ 6,187rpm | 406.1 hp @ 5,814rpm |

This is the final pull on our dyno, filmed from behind the car, from the start of the run right through to the end. Tap Sound on to hear it.
Audi’s own RS4 with the 2.9 TFSI twin-turbo V6 makes 600Nm from the factory. Tuned, this RS Q3 made 657Nm on our rollers, from a 2.5-litre five-cylinder. For a tuned RS4 of our own, see the RS4 Avant we took to 798Nm.

The peak is only part of it. Tuned, this RS Q3 holds over 600Nm from around 3,300 to 5,300rpm, where the stock run peaked at 552Nm, with 100Nm or more extra torque from around 3,500 to 5,350rpm and up to 143Nm more around 3,800rpm. It makes 50bhp or more extra from around 3,500rpm right to the top of the stock run, and stays above 450bhp from around 5,300rpm to the end of the run.
The 7-speed S tronic’s TCU was calibrated on the same visit and set up to match the extra torque, so the engine and gearbox are calibrated as one package instead of two separate jobs. See our DSG / S tronic gearbox tuning page for more.

Diagnostics and a health check first, then baseline runs on our 4WD linked dyno with live data logging. The engine calibration was built from there with repeated runs, the gearbox calibration was set up to match, and the final pulls verified the result. No generic files: a calibration written for this car, proven on our dyno.

Got an RS Q3? See our Audi RS Q3 tuning figures, check your car’s gains and price, or read about the RS4 Avant and the S5 Sportback we have tuned.

More torque than an R8 V10: an RS4 Avant from 451bhp/621Nm to a dyno-proven 536.3bhp and 798Nm, engine and gearbox tuned together.
Read article
More torque than a B9 RS5: an S5 Sportback from 347bhp/546Nm to a dyno-proven 420.2bhp and 647Nm, engine and gearbox tuned together.
Read articleWhat TCU tuning does for your VAG DSG or S-Tronic gearbox, faster shifts, higher torque limits and launch control.
Read articleReady When You Are
Specialist BMW & VAG tuning, dyno-proven in Warrington. Check your exact gains and price, then book online.
See Your Car’s Gains & Price Book Your RemapCar not listed, or after something specific? Get a free quote ›