4.9 · 270+ reviews
Pay with Klarna · ★ 4.9 · 270+ Google reviews · In-house 4WD dyno · before & after printout · BMW ECU unlocking · in-house, same day · 0% finance with Bumper · spread it over 6 months · 10,000+ vehicles tuned · 15+ years · BMW & VAG specialists · Warrington · Pay with Klarna · ★ 4.9 · 270+ Google reviews · In-house 4WD dyno · before & after printout · BMW ECU unlocking · in-house, same day · 0% finance with Bumper · spread it over 6 months · 10,000+ vehicles tuned · 15+ years · BMW & VAG specialists · Warrington ·
... ...
Gift Cards ›
0% Finance ›

Home / Blog / Customer Builds

Customer Builds

VW Caddy Mk5 2.0 TDI: ECU Unlock + Stage 1 Custom, 200bhp & 465Nm

19 November 2026 · DC Remapping UK

This Volkswagen Caddy Mk5 panel van came in for an ECU unlock and our Stage 1 custom dyno tune. It runs the 2.0 TDI EA288 evo, the same engine covered on our Caddy tuning figures page.

VW Caddy 2.0 TDI VW Caddy Mk5 rear three-quarter on the dyno
The Caddy strapped down on our rolling road.

ECU unlocked in-house first

Registered in 2021, this Caddy left the factory with a locked ECU, so we unlocked it in-house before any baseline runs or logging. Its Bosch MD1CS004 is one of the units we read and write on our own bench.

The numbers

On the baseline run it made 128.2bhp and 337Nm. With our calibration it made 200.0bhp and 465Nm, with 172.6bhp at the wheels. That is 71.8bhp and 128Nm more:

MeasurementStockDC Stage 1 Custom
Engine power128.2 hp @ 2,831rpm200.0 hp @ 3,664rpm
Engine torque337 Nm @ 2,206rpm465 Nm @ 2,485rpm
Wheel power111.0 hp @ 2,774rpm172.6 hp @ 3,487rpm
VW Caddy 2.0 TDI dyno graph, stock vs DC Stage 1 Custom
The dyno printout: stock in red, our Stage 1 Custom in blue.

Watch the full dyno run

This is the final pull on our dyno, filmed from behind the car, from the start of the run right through to the end. Tap Sound on to hear it.

The final power run on our rolling road: 200.0bhp and 465Nm.

More torque than a Golf R

Every Golf R we list makes 420Nm from the factory. Tuned, this Caddy made 465Nm on our rollers. Its 200bhp is also exactly what a Golf GTD makes as standard, with 65Nm more torque than one. It beat the 185bhp and 410Nm we quote for this engine at Stage 1 on our own Caddy figures page.

VW Caddy 2.0 TDI VW 2.0 TDI EA288 evo engine bay
The 2.0 TDI EA288 evo: health checked, unlocked and logged before any tuning.

Where the gain is

For a van the peak matters less than the middle. At 2,200rpm, where it used to make its 337Nm peak, it now makes 459Nm. It holds over 400Nm from around 1,800 to 3,500rpm, and gains 100Nm or more from around 1,900rpm right to the end of the run — the part of the rev range a loaded van actually works in.

VW Caddy 2.0 TDI VW Caddy steering wheel and dash
Live data logged on the run, not a file loaded and sent on its way.

How it was done

Diagnostics and a health check first, then the ECU unlock, then baseline runs on our rolling road with live data logging. The calibration was built from there with repeated runs, and the final pulls verified the result. No generic files: a calibration written for this van, proven on our dyno.

VW Caddy 2.0 TDI VW Caddy Mk5 front three-quarter on the dyno
Tuned, verified and ready to go back to work.

Want to know what yours would make? Check your car’s power and price, or book a Stage 1 Custom Dyno Tune.

Related Reading

All Tuning Guides

Ready When You Are

See What Your Car Will Make

Specialist BMW & VAG tuning, dyno-proven in Warrington. Check your exact gains and price, then book online.

See Your Car’s Gains & Price Book Your Remap

Car not listed, or after something specific? Get a free quote ›