This 2019 BMW X3 M40d (G01) came in for our Stage 1 custom dyno tune for its B57 3.0 twin-turbo diesel, with an xHP Stage 3 calibration for its ZF 8-speed gearbox.

On the baseline run it made 322.8bhp and 684Nm. With our calibration and xHP Stage 3 it made 409.1bhp and 801Nm, with 360.4bhp at the wheels. That is 86.3bhp and 117Nm more:
| Measurement | Stock | DC Stage 1 Custom & xHP ST3 |
|---|---|---|
| Engine power | 322.8 hp @ 4,347rpm | 409.1 hp @ 4,456rpm |
| Engine torque | 684 Nm @ 2,273rpm | 801 Nm @ 2,522rpm |
| Wheel power | 280.1 hp @ 3,852rpm | 360.4 hp @ 4,063rpm |

This is the final pull on our dyno, filmed from behind the car, from the start of the run right through to the end. Tap Sound on to hear it.
BMW’s own X3 M Competition makes 600Nm from the factory, or 650Nm from 2021. Tuned, this X3 M40d made 801Nm on our rollers. It also beat the 400bhp and 800Nm we quote for an X3 M40d at Stage 1 in our X3 tuning figures.

The peak is only part of it. Tuned, this M40d holds over 750Nm from around 2,100 to 3,350rpm and over 700Nm from around 1,950 to 4,150rpm, where the stock run peaked at 684Nm. It carries 100Nm or more extra torque from around 2,250rpm right to the top of the run, close to 150Nm more at around 4,200rpm, and it makes over 400bhp from around 4,000 to 4,700rpm.
xHP Stage 3 was flashed into the ZF 8-speed on the same visit. It removes the factory torque limiter and raises line pressure for the extra torque, with quicker shifts in D and harder, faster shifts in Sport and Sport+, so the engine and gearbox are calibrated as one package instead of two separate jobs.

Diagnostics and a health check first, then baseline runs on our 4WD linked dyno with live data logging. The engine calibration was built from there with repeated runs, the gearbox was flashed with xHP Stage 3, and the final pulls verified the result. No generic files: a calibration written for this car, proven on our dyno.

Got an X3 M40d? See our BMW X3 M40d tuning page and BMW X3 tuning figures, check your car’s gains and price, or read about another X3 M40d we tuned with xHP and the X6 M50d.

Over 800Nm from a family SUV, an X3 M40d from 324bhp/686Nm to a dyno-proven 404bhp and 805Nm.
Read article
More torque than an X5 M50d: a 2022 X5 40d, ECU unlocked in-house, from 335bhp/727Nm to a dyno-proven 405.9bhp and 843Nm.
Read article
More torque than an X6 M: a 2020 X6 M50d, ECU unlocked in-house the same day, from 377bhp/739Nm to a dyno-proven 441bhp and 860Nm.
Read articleReady When You Are
Specialist BMW & VAG tuning, dyno-proven in Warrington. Check your exact gains and price, then book online.
See Your Car’s Gains & Price Book Your RemapCar not listed, or after something specific? Get a free quote ›