This 2020 BMW 530d xDrive (G30) came in for our Stage 1 custom dyno tune for the B57 3.0 diesel, with an xHP Stage 3 calibration for its ZF 8-speed automatic, both developed on the same visit.

On the baseline run it made 266.3bhp and 625Nm. With our calibration and xHP Stage 3 it made 329.9bhp and 746Nm, with 279.0bhp at the wheels. That is 63.6bhp and 121Nm more:
| Measurement | Stock | DC Stage 1 Custom & xHP ST3 |
|---|---|---|
| Engine power | 266.3 hp @ 3,810rpm | 329.9 hp @ 4,013rpm |
| Engine torque | 625 Nm @ 2,466rpm | 746 Nm @ 2,363rpm |
| Wheel power | 223.0 hp @ 3,664rpm | 279.0 hp @ 3,567rpm |

This is the final pull on our dyno, filmed from behind the car, from the start of the run right through to the end. Tap Sound on to hear it.
BMW’s own 540d makes 680Nm, or 700Nm in its later mild-hybrid form. Tuned, this 530d made 746Nm on our rollers: more torque than either, from the 530d’s own B57. It is also 26Nm more than the 720Nm we quote for a G30 530d at Stage 1 in our 5 Series tuning figures.

The peak is only part of it. Tuned, this 530d holds over 700Nm from around 2,050 to 3,000rpm and over 650Nm from around 1,900 to 3,400rpm, with 100Nm or more extra torque from around 2,150rpm right to the top of the stock run. Power stays above 300bhp from around 3,050rpm to the end of the run, with 50bhp or more over standard from around 3,100rpm to the top of the stock run. In normal driving that is the part you feel: it pulls harder through the mid-range, holds on for longer and needs fewer downshifts.
xHP Stage 3 was flashed into the ZF 8-speed on the same visit. It removes the factory torque limiter and raises line pressure for the extra torque, with quicker shifts in D and harder, faster shifts in Sport and Sport+, so the engine and gearbox are calibrated as one package instead of two separate jobs.

Diagnostics and a health check first, then baseline runs on our 4WD linked dyno with live data logging. The engine calibration was built from there with repeated runs, the gearbox was flashed with xHP Stage 3, and the final pulls verified the result. No generic files: a calibration written for this car, proven on our dyno.

Got a 530d? See our BMW 5 Series tuning figures and BMW B57 tuning page, check your car’s gains and price, or see another 530d G30 we took to Stage 1 with xHP and the 530d xDrive we unlocked and tuned.

A B57 5 Series refined the right way, 266bhp/637Nm up to a dyno-proven 330bhp and 754Nm, with xHP Stage 3 sharpening the ZF8.
Read article
More torque than a 540d: a 530d xDrive, ECU unlocked in-house, from 279bhp/643Nm to a dyno-proven 329.6bhp and 745Nm at Stage 1.
Read articleWhat xHP gearbox tuning does for your BMW's ZF8 auto, faster, firmer shifts, higher torque limits, launch control and manual mode.
Read articleReady When You Are
Specialist BMW & VAG tuning, dyno-proven in Warrington. Check your exact gains and price, then book online.
See Your Car’s Gains & Price Book Your RemapCar not listed, or after something specific? Get a free quote ›