Home › Tuning Figures › All Models › Rolls Royce Dawn
Rolls Royce Tuning
Rolls Royce Dawn Remap Figures
Before and after power and torque for every Rolls Royce Dawn engine we tune, measured on our in-house 4WD dyno. Every map is written for your exact car and is fully reversible.
Rolls Royce Dawn 6.6 V12 power & torque delivery
Power & torque deliveryindicative shape · scaled to your peak figures · RPM
Stock bhpStock NmStage 1 bhpStage 1 Nm
Shape is indicative. Your real before & after curves are measured on our 4WD dyno on the day and you take the printout home.
Power & torque deliveryindicative shape · scaled to your peak figures · RPM
Stock bhpStock NmStage 1 bhpStage 1 Nm
Shape is indicative. Your real before & after curves are measured on our 4WD dyno on the day and you take the printout home.
All years
| Engine | Standard | Stage 1custom dyno tuning | Stage 2custom dyno tuning | Price | |
|---|
| 6.6 V12Petrol | 571 bhp
780 Nm | 700 bhp+129
950 Nm+170 | — | £1799 | Book |
Every price on this page is a full custom dyno tune
Not a generic file bought in and flashed over the port. Your Rolls Royce Dawn is strapped to our in-house 4WD dyno and the map is written for your car, on the day, from its own data.
- Health check firstWe look the car over and read the fault memory before we touch anything. If something is wrong, you get told. We don't map over a problem.
- Live data loggingBoost, ignition timing, fuelling, knock and temperatures all watched in real time while the car is running under load.
- Custom calibration on the dynoThe map is built and adjusted run by run against what your engine is actually doing, not what a file supplier assumed.
- Before and after printoutYou leave with the graph: your standard figures and your tuned figures, measured on the same rollers, the same day.
Spread the cost. From
£299.84/mo over 6 months at
0% APR, interest free. Or 3 interest-free payments of
£599.67 with Klarna.
How finance works › Rolls Royce Dawn remapping questions
What gains can I expect from Stage 1 on a Rolls Royce Dawn?
Gains vary by engine. The strongest on the Rolls Royce Dawn is the 6.6 V12, which goes from 571bhp and 780Nm to 700bhp and 950Nm, a gain of 129bhp. Find your engine in the table above for its own numbers.
What does a Rolls Royce Dawn remap cost?
Prices start at £1799 inc VAT for Stage 1 on a Rolls Royce Dawn. Each engine in the table shows its own price. 0% finance over 6 months and Klarna are both available.
Does a remap invalidate the warranty or insurance on a Rolls Royce Dawn?
You will need to tell your insurer, as with any modification, and it can affect a remaining manufacturer warranty. Because we save your original software first, the Rolls Royce Dawn can be put back to standard at any point.
How long will my Rolls Royce Dawn be with you, and can it be undone?
Allow roughly two hours for Stage 1, or a half-day if the ECU needs unlocking first. Everything is reversible: we store your original software so the Rolls Royce Dawn can go back to stock on request.
Ways to pay
3 interest-free payments0% finance over 6 monthsCard & Apple Pay£50 deposit secures your slotHow finance works › Other Rolls Royce models
Whichever you pick, the total carries through to checkout, so pay in full by card, Apple Pay or Klarna (3 interest-free payments), or secure the slot with a £50 deposit. Figures are typical results for a healthy, standard vehicle on our dyno. Your car’s actual output depends on its condition, fuel quality and any supporting modifications. Prices shown are for Stage 1 custom dyno tuning inc VAT; locked ECUs (most BMW and Audi registered from mid-2020) carry an additional unlocking charge, confirmed when you book.
