Home › Tuning Figures › Cupra Ateca
Cupra Tuning
Cupra Ateca Remap Figures
Before and after power and torque for every Cupra Ateca engine we tune, measured on our in-house 4WD dyno. Every map is written for your exact car and is fully reversible.
Cupra Ateca — 2.0 TSI power & torque delivery
Power & torque deliveryindicative shape · scaled to your peak figures · RPM
Stock bhpStock NmStage 1 bhpStage 1 Nm
Shape is indicative. Your real before & after curves are measured on our 4WD dyno on the day and you take the printout home.
Power & torque deliveryindicative shape · scaled to your peak figures · RPM
Stock bhpStock NmStage 1 bhpStage 1 Nm
Shape is indicative. Your real before & after curves are measured on our 4WD dyno on the day and you take the printout home.
KH7 - 2018 -> 2024
| Engine | Standard | Stage 1custom dyno tuning | Stage 2custom dyno tuning | Price | |
|---|
| 2.0 TSI1984cc - EA888 · Petrol | 300 bhp
380 Nm | 360 bhp+60
500 Nm+120 | — | £449+ gearbox £325
S1 + gearbox £649 › | Book |
Every price on this page is a full custom dyno tune
Not a generic file bought in and flashed over the port. Your Cupra Ateca is strapped to our in-house 4WD dyno and the map is written for your car, on the day, from its own data.
- Health check firstWe look the car over and read the fault memory before we touch anything. If something is wrong, you get told — we don't map over a problem.
- Live data loggingBoost, ignition timing, fuelling, knock and temperatures all watched in real time while the car is running under load.
- Custom calibration on the dynoThe map is built and adjusted run by run against what your engine is actually doing, not what a file supplier assumed.
- Before and after printoutYou leave with the graph — your standard figures and your tuned figures, measured on the same rollers, the same day.
Spread the cost. From
£74.84/mo over 6 months at
0% APR — interest free. Or 3 interest-free payments of
£149.67 with Klarna.
How finance works ›Book engine
and gearbox tuning together and
save £125.
Cupra Ateca remapping questions
How much bhp does a Cupra Ateca gain from a remap?
Gains vary by engine. The strongest on the Cupra Ateca is the 2.0 TSI, which goes from 300bhp and 380Nm to 360bhp and 500Nm — a gain of 60bhp. Find your engine in the table above for its own numbers.
What does a Cupra Ateca remap cost?
Prices start at £449 inc VAT for Stage 1 on a Cupra Ateca. Each engine in the table shows its own price, and adding gearbox tuning at the same time saves £125. 0% finance over 6 months and Klarna are both available.
Does a remap invalidate the warranty or insurance on a Cupra Ateca?
A remap is an aftermarket modification, so it is your responsibility to declare it to your insurer. It may also affect any remaining manufacturer warranty. Our maps are fully reversible and we keep your original file, so the car can be returned to stock whenever you need.
How long will my Cupra Ateca be with you, and can it be undone?
Most Stage 1 tunes take around two hours, and cars needing ECU unlocking are booked as a 4-hour half-day. It is completely reversible — your factory file is saved before we touch anything.
Ways to pay
3 interest-free payments0% finance over 6 monthsCard & Apple Pay£50 deposit secures your slotHow finance works › Other Cupra models
Whichever you pick, the total carries through to checkout — pay in full by card, Apple Pay or Klarna (3 interest-free payments), or secure the slot with a £50 deposit. Figures are typical results for a healthy, standard vehicle on our dyno. Your car’s actual output depends on its condition, fuel quality and any supporting modifications. Prices shown are for Stage 1 custom dyno tuning inc VAT; locked ECUs (most BMW and Audi registered from mid-2020) carry an additional unlocking charge, confirmed when you book.
